PASS METHOD. How to use a fire extinguisher. Acronym for PASS, pull. Aim. Squeeze. Sweep
To use a fire extinguisher correctly, experts say that one should remember the acronym P.A.S.S. -- P: Pull the pin. A: Aim at the base of the fire. S: Squeeze the trigger. S: Sweep side to side. But they say the most important lesson of all is when not to try using an extinguisher.
The PASS System for extinguishing fires Elite Fire
To help remember the use of a fire extinguisher the acronym PASS was created. This four step simple to use process is as follows: PULL the safety pin on the handle (This will also break the tamper seal) AIM the nozzle at the base of the fire (Don't touch the plastic horn on CO2 extinguishers, it gets very cold and can damage skin.)
How To Use A Fire Extinguisher Pass Labeled Instruction Vector Illustration Stock Illustration
The PASS System In an emergency, using a fire extinguisher can be frightening, especially if you're unfamiliar with the process. There is an acronym, P.A.S.S., to help you remember the four simple steps: Pull, Aim, Squeeze, and Sweep. Let's break it down now: P - Pull: Pull the safety pin. The safety pin prevents the extinguisher from discharging.
HOW TO USE A FIRE EXTINGUISHER Flame Safety Cornwall Fire Protection Fire Extinguishers
PASS is the acronym used to describe the four essential steps of operating a fire extinguisher. P ull The first step is to pull the pin at the top of the extinguisher. The pin is in place to prevent the handle from being accidently pressed. Immediately test the extinguisher before approaching the fire to ensure it is working correctly. A im
How to Use a Fire Extinguisher PASS System for Fire Extinguishers
A - AIM at the base of the fire and not at the flames. You must extinguish the fuel to the fire. S - SQUEEZE the lever. This will release the extinguishing agent in the extinguisher. If the handle is released, the discharge will stop. S - SWEEP from side to side.
How to Use & Inpect Fire Extinguisher A Complete Guide to Fire Safety 101
R.A.C.E. stands for remove, alert/alarm, confine/contain, and extinguish. While your team might already have the proper training on what to do in a fire emergency, parts of your these strategies can become lost in a panic. Here are descriptions of each of these steps. Remove Occupants from the Building
4 Steps for Using a Fire Extinguisher Correctly
A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished. Download steps. 4.
Safety Posters Tangram Personal Care and Assisted Living Insurance Center
A stands for aim the nozzle or hose at the base of the fire. Keep a safe distance away. S stands for squeeze the handle to release the extinguishing materials. S also stands for sweep the nozzle from side to side. Keep aiming at the base of the fire until it's out, and repeat steps two through four if it starts up again.
PASS fire extinguisher All Protect Systems Inc.
The PASS acronym stands for Pull, Aim, Squeeze and Sweep. Each section of the PASS acronym is a separate stage of tackling a fire with an extinguisher. Though there are very few words, they each provide enough information to help you correctly use a fire extinguisher.
When you need to use a fire extinguisher, it's important to remember the acronym PASS. This
PASS stands for Pull, Aim, Squeeze, Sweep, and refers to the correct and safest way to use a fire extinguisher. It acts as a useful device for remembering each step in extinguishing a fire. Below, we discuss each aspect of PASS in more detail. Pull
Fire Extinguishers Lincoln Park CERT
By using the acronym P.A.S.S., you can easily remember how to use your fire extinguisher in the event of a fire. P: Pull the safety pin from the handle. A: Aim the extinguisher nozzle or hose at the base of the fire. (not directly at the flames) S: Squeeze the handle slowly to discharge the agent.
Fire Extinguisher Training training seminars
The PASS method is a simple and memorable acronym that can help you remember the necessary steps to use a fire extinguisher correctly. P - Pull the pin: First, you must remove the safety pin to start using the fire extinguisher. This pin is typically located at the top of the extinguisher and is secured by a plastic or metal seal.
Fire Extinguisher Classes and Best Practices Northeast Security Solutions
PASS stands for: Pull - pull out the pin from the extinguisher, which will allow you to use the trigger. This may sometimes require a twisting action as well as pulling. Aim - aim the extinguisher's hose at the fire. The way in which you aim may differ depending on the type of extinguisher.
How Do I Use a Fire Extinguisher?
Using a fire extinguisher requires just 4 easy steps, each represented by a letter in the word PASS: P ull the pin: every fire extinguisher has a safety pin to prevent accidental discharge of the extinguishing media during handling. There is also a safety tie keeping the pin in place. The fire extinguisher cannot discharge until this pin is.
ARPC recognizes Fire Prevention Week > Air Reserve Personnel Center > Article Display
Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system - Pull, Aim, Squeeze, Sweep. Pull the pin on the extinguisher. Aim the.
In case your fire extinguisher has been sitting around collecting dust, here’s everything you
It's easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire.